Prices And Specis Of ZTE ZXMP S385 SDH-Based Multi-Service Node equipment
The ZXMP S385 optical terminal (ZTE S385) is a STM-16/STM-64 multi service transmission equipment developed by Zhongxing manufacturer. It takes full account of the diversity of network services and the changes in network structure.
ZTE ZXMP S385 transmission equipment integrates ADM, DXC, Ethernet switches and ATM switches to provide a large capacity and long distance service transmission. It can be applied to the establishment, capacity expansion of all kinds of transmission lines and large capacity city service scheduling, which can meet the bandwidth requirements of different fields and different levels. It is an ideal equipment for the construction of broadband transmission network.
ZXMP S385 has high capacity and high order scheduling capability, providing the highest 240G crossover capability and 40G low order crossover capability. As a 10G system, the maximum device can support 9 10G two fiber rings or 4 10G four fiber rings; as a 2.5G system, the device can support 36 2.5G two fiber rings or 18 2.5G four ring. The equipment business slot is rich, and supports 14 business slots at most. It can provide up to 176 ECC processing capacity, and fully meet the requirements of complex networking. The device supports high-density 10G, 2.5G, 155M and GE boards to the top level in the industry.
Product Characteristics Of ZTE ZXMP S385 SDH-Based Multi-Service Node equipment
Superior scalability: ZXMP S385 can be upgraded to 10G system smoothly as a 2.5G system, while providing a more powerful 2M/155M access capability and data service access capability. ZXMP S385 can be used flexibly with ZTE's other SDH devices: ZXMP S325, ZXMP S320, ZXMP S390, ZXMP S380, and S390. It supports the single board mixing, the optical module can be pluggable (SFP module, LC joint), supports the ALS function, supports the on-line optical power detection of the optical aperture, is easy to locate the line problem quickly, has high equipment integration, reduces the cost of land occupation, low power consumption and lower electricity cost. ZXMP S385 devices provide various kinds of data interfaces on the basis of traditional SDH devices, such as EOS, RPR, ATM, SAN/DVB, etc. It supports dual bus, single board 1+1 hot backup, branch board 1:N protection, network EPS protection, power protection and so on. It fully supports all the protection methods recommended by ITU-T, and provides a special network protection concept - logic subnet protection.
Flexible networking scheduling function to enhance network profitability and reduce CAPEX
The flexible multi service access function provides a high integrated service interface board, and access a large number of PDH, SDH and data services to meet the needs of large capacity service access.
Superior scalability, protection of investment, and reduction of OPEX
It can keep smooth evolution and expansion. By adding or replacing plate parts, users can achieve the effect of a new backbone layer, greatly reduce the cost of two construction, support extended support, provide support for a large number of 2M/155M services, and extend the traditional scheduling layer to a comprehensive equipment with business landing capability.
The leading RPR function of the industry supports the evolution of IP network and protects investment.
It supports double ring work at the same time, supports unicast, multicast and broadcast services, realizes bandwidth statistics reuse, increases bandwidth utilization, has fast service capability, and high QOS guarantee. It supports breaking through the RPR single loop restriction, making networking more flexible, while avoiding landing and switching, and reducing fault points.
The design is flexible and the network planning is optimized.
Support single board mixing, business configuration, maintenance, network planning optimization is very convenient.
Extensive market application, high technology maturity and high reliability.
With its mature technology and excellent performance, ZXMP S385 has been widely applied in the network of major operators and private network customers at home and abroad. Powerful embedded wave division function saves fiber resources and realizes wavelength division optical signal division and multiplexing.
Product Parameters Of ZTE ZXMP S385 SDH-Based Multi-Service Node equipment
High-end 360G/240G/120G; low-order 40G
Number of service slots
E1/T1/E3/T3, STM-1/4/16/64, STM-64 FEC, 10GE/GE/FE, SAN Interface
Protection mechanism: protection cross & clock unit, network element control board, power board and clock interface board 1+1 protection; ASON protection; logical subnet protection; electrical interface TPS protection; RPR protection; DNI protection ; SNCP protection;
Advanced design: slot card is not limited by duality, more flexible; industry-inspired business cross-ring technology, support for multicast, multi-purpose design;
888.2mm (height) × 482.6mm (width) × 270mm (deep)
Maximum power consumption
Ambient temperature 0 °C ~ +45 °C, relative humidity 5% ~ 95%
ZTE S385 equipment and ZXMP S385 price are provided by CCIT Mdt InfoTech Ltd. CCIT Mdt InfoTech Ltd explains ZTE ZXMP S385 transmission equipment configuration and ZXMP S385 optical terminal machine parameters, if you need to know ZTE S385 manufacturer and ZXMP S385 product description, please consult the forwarding agent.