Need help? Send Email To Us leo.zhao@ccitel.com

HUAWEI MA5800 Series Frequently Asked Questions

1. Q: What's the default password of MA5800?

A: − The default username and password for the MA5800 is root/admin123.

− The default username and password for the previous versions of the MA5680T/MA5600T/MA5683T/MA5603T/MA5608T V800R017C00 are: root/admin, and the username and password for V800R017C00 and later are: root/admin123.

 

2. How many service slots are in MA5600-X17, MA5800-X15, and MA5800-X7?

A: − MA5800-X17 have 17 service slots

MA5800-X15 have 15 service slots

MA5800-X7 have 7 service slots

 

3. Does the MA5800 support active/standby mode?

A: − The MA5800 does not support the active/standby mode and only supports the load sharing mode. The MA5800 adopts a distributed architecture. When the dual main control boards are dual-distributed, the active main control board and the standby main control board simultaneously carry services, which can effectively utilize the bandwidth of the active main control board and the standby main control board.
Each main control board has a control part and an exchange part.

The control part of the two main control boards is fixed in the active/standby mode, the control part is in the main state, which is called the main control board, and the control part is in the standby state, which is called the standby main control board. When the control part of the main control board is faulty or reset, the service of the control part of the main control board is automatically switched to the control part of the standby main control board to ensure that the main control function and related services are not interrupted.
The switching part of the two main control boards is fixed in the load sharing mode. The maximum switching bandwidth of the system is the maximum switching capacity of the two main control boards. When a switchover of a main control board or a main control board fails, the traffic of the faulty main control board is automatically switched to another main control board. The maximum switching bandwidth of the system is the maximum exchange of a main control board. capacity.

Because the MA5800 does not support the active/standby mode, the configuration is not supported:

Protection between the main control board and the standby main control board.
Protection between the main control board port and the standby main control board port.
Protection between the aggregation group of the active main control board and the aggregation group of the standby main control board.

 

4. Is the default username and password of the MA5800 the same as that of the MA5680T?

A: − Based on the latest password security policy, the default username and password of the MA5800 is root/admin123, and the default username and password of the MA5680T are also changed from root/admin to root/admin123 from V800R017C00. In order to improve the security of the communication network, it is recommended to change the password when logging in to the device for the first time.

 

5. Can the MA5800 use the board of the MA5680T?

A: − The MA5800 adopts a new hardware structure and cannot use the MA5680T board.

 

6. Can the MA5800 use the board of the MA5680T?

A: − The MA5800 adopts a new hardware structure and cannot use the MA5680T board.

 

7. Can a 10G PON board be used with a PON ONU?

A: − The 10G EPON board can be used with the EPON ONU. The 10G GPON board cannot be used with the GPON ONU. Therefore, the EPON ONU can be cut to the 10G EPON port, and the GPON ONU cannot be cut to the 10G GPON port.

 

8. How does the MA5800 uplink port change from 10GE uplink to GE uplink?

A: − The MA5800 can be used on the main control board or uplink board to support 10GE/GE uplink. The upstream port defaults to 10GE upstream and can be set using the speed command. To avoid communication problems with the upper device, the uplink port rate must be the same as the port speed of the docking device.

 

9. How does the MA5800 switch to the Chinese interface?

A: − The MA5800 supports Chinese from the V100R016C10SPC201 version. You can use the switch language-mode command to switch language attributes.

 

10. Why is it not prompted to add this type of device when adding the MA5800 to the U2000?

A: − The U2000 supports the MA5800 device from V200R014C60. The network management version of the MA5800 is recommended.

 

11. The MA5800 is installed in the original cabinet of the MA5680T. Can the MA5800 be installed on the power distribution box of the current network model?

A: − There is no exact match and there is a power limitation. Configure the service board based on the remaining power supply capacity of the existing network cabinet.

 

12. Can the GPFD/GPBD be used in an MA5800 Series OLT?

A: − can not be, MA5800 Series GPON card is GPSF or GPHF, and the difference between GPSF and GPHF is that GPHF support 1588V2 protocol.

 

13. Can we install a GPON board on Huawei MA5600T into new MA5800?

A: − MA5800 is Huawei new OLT, it’s GPON boards are different from GPON boards on MA5600T. If you buy Huawei MA5800, you need buy GPON board correspondingly, like GPSF, GPHF.

Related FAQ

How to treat PoE switches 150 meters and 250 meters long distance transmission correctly

How to treat PoE switches 150 meters and 250 meters long distance transmission correctly

EnGenius EWS1200-28T AC controller Gigabit wireless management intelligent switch

EnGenius EWS1200-28T AC controller Gigabit wireless management intelligent switch

Application of industrial Ethernet switch in distributed control system of power station

Application of industrial Ethernet switch in distributed control system of power station