Need help? Send Email To Us leo.zhao@ccitel.com

How to know the management IP of an ONU (Huawei OLT + Huawei ONU)

interface epon 0/1 // Here you can obtain the ONU ID to be replaced by checking the status of the device under the PON port. Assume that the faulty device is located at port 2 and the ID is 6

Ont modify 2 6 mac 1111-1111-1111 //Replace the device.




MA5680T (config)# switch language-mode Chinese and English switching

MA5680T (config)#display board 0 View all boards 0 is the frame number

MA5680T (config)# interface gpon 0/1 enters GPON command mode 1 is the PON port number

MA5680T(config-if-gpon-0/1)# port 0 ont-auto-find enable 0 is the port number


MA5680T (config)#display ont autofind all View the automatically discovered ONUs (if there is an auto-discovered ONU as shown below)
-------------------------------------------------- -------------------
Serial number : 1
Frame/slot/port: 0/1/0
ONT SN : 4857544350F5FB0A
Password : 0x30303030303030303030(0000000000)
Logical identifier :
Check code :
Manufacturer ID : HWTC
ONT version : MA5626 VER.D
ONT software version : V8R308 C00
ONT Device ID : SmartAX MA5626
ONT automatic discovery time : 2012-03-19 15:37:40+08:00
-------------------------------------------------- -------------------
GPON automatically discovers the number of ONTs as 1

HEB-GuoYuan-OLT-2.MAN.MA5680T(config)#display ont info by-loid 510000000000(order number)



HEB-GuoYuan-OLT-1.MAN.MA5680T(config-if-epon-0/11)#display ont port state 2 8 et
H-port 1
-------------------------------------------------- ---------------------
ONT number Port number Port type Port Port duplex Port link Loop status
Rate (Mbps) status
-------------------------------------------------- ---------------------
8 1 ETH 100 Full Duplex Online -
-------------------------------------------------- ---------------------


HEB-GuoYuan-OLT-1.MAN.MA5680T(config-if-epon-0/11)#display ont port state 2 8 po
Ts-port 1
-------------------------------------------------- ----------------------------
Port number Port Physical Port Management Pickup Hangup Current Session Service Operation Port Connection Service Code
Status Status Status Type Status Status Mode
-------------------------------------------------- ----------------------------
1 - Unlock - - - - -
HEB-GuoYuan-OLT-1.MAN.MA5680T(config-if-epon-0/11)#display ont port attribute 2
8 eth 1
-------------------------------------------------- ----------------
Port number Negotiation mode Rate Duplex Port Flow control Native upstream traffic Downstream traffic
(Mbps) Switch Switch Vlan Template Index Template Index
-------------------------------------------------- ----------------
1 Auto-negotiation Auto-negotiation Auto-negotiation Open Close 1041 Not concerned Not concerned
-------------------------------------------------- ----------------
Description: *The port traffic template that identifies the ONT is configured through discrete commands.

HEB-GuoYuan-OLT-1.MAN.MA5680T(config-if-epon-0/11)#ont port attribute 2 8 eth 1
Operational-state () switch port

HEB-GuoYuan-OLT-1.MAN.MA5680T(config-if-epon-0/11)#ont port attribute 2 8 eth 2
?
---------------------------------------------
Epon-0/11 mode command:
---------------------------------------------
Auto-neg auto-negotiation
Ds-policing downlink speed limit function
Flow-control flow control switch
Operational-state ONT port switch
Speed ​​rate
Up-policing uplink speed limit function

 

Enter config terminal configuration


1. View the mac-address of the ONU through the port.
MA5680T (config)# display mac-address port 0/1/0 (0/1/0 is the frame number/slot number/port number)

2. View the mac-address of the ONU through the VLAN
MA5680T (config)# display mac-address vlan 100 (100 is the VLAN id)

3. View the service-port information of the ONU
MA5680T(config)#display service-port port 0/1/0 ont 1 (0/1/0 is the frame number/slot number/port number 1 is the ONU id)

4. View the version information of the MA5680T
MA5680T(config)# display version

5, view the DBA template

MA5680T(config)# display dba-profile all

6, view the line template

MA5680T(config)#display ont-lineprofile gpon all

7. View board information
MA5680T(config)# display board 0

8. View the information about the ONU on the board
MA5680T(config)# display board 0/1 (0/1 is the frame number/slot number)

 

Enter GPON command mode


1. Check the ONU receiving power

MA5680T(config-if-gpon-0/1)#display ont optical-info 0 1 (0 is the port number 1 is the ONU id number)


2. View the status of the ONU

MA5680T(config-if-gpon-0/1)#display ont info 0 1 (0 is the port number 1 is the ONU id number)

3. View the port information of the PON board

MA5680T(config-if-gpon-0/1)#display port info 0 (0 is the port number

4. Check the port status of the PON board

MA5680T(config-if-gpon-0/1)#display port state 0 (0 is the port number

5. View the registration information of the ONU

MA5680T(config-if-gpon-0/1)#display ont register-info 0 1 (0 is the port number 1 is the ONU id number)
-------------------------------------------------- -------------------
Index number : 2
Authentication method : SN certification
ONT serial number: 485754436E3EDB04
Password :
ONT type : SmartAX MA5620
Online time : 2012-03-07 06:42:56
Offline time : 2012-03-09 06:00:49
Downline reason: ONT power down
-------------------------------------------------- -------------------
Index number : 1
Authentication method : SN certification
ONT serial number: 485754436E3EDB04
Password :
ONT type : SmartAX MA5620
Online time : 2012-02-10 09:25:58
Offline time : 2012-03-07 06:15:55
Downline reason: ONT power down
-------------------------------------------------- -------------------

6. View ONU version information
5680T(config-if-gpon-0/1)#display ont version 0 1 (0 is the port number 1 is the ONU id number)
--------------------------------------------------
Frame/slot/port: 0/1/0
ONT number : 1
Manufacturer Number : HWTC
ONT version : MA5620 VER.B
Product No. : 111
Equipment Number : SmartAX MA5620
Main software version : V8R308 C00
Alternate software version :
-------------------------------------------------< Br /> MA5680T(config)#vlan 10 smart (vlan can be added at will)
MA5680T(config-if-vlanif10)#ip address 192.168.100.2 255.255.255.0 /// (as long as it is 192.168.100 except 1 and 255)
MA5680T(config)#service-port vlan 10 epon 0/1/0 ont 1 multi-service user-vlan 1000 ///(0/1/0 ont 1 is the port ont and ont id)
=========================================================== ====================
MA5680T(config)#display ont info ?

By-desc Find ONT based on description information
By-ip Find ONT based on IP address
By-loid finds ONT based on logical identifiers
By-mac finds ONT based on MAC address
By-password Find ONT based on password
By-sn Find by serial number
ONT frameid<0,1> chassis number
---------------------------------------------
3View the service-port information of the ONU

MA5680T(config)#display service-port port 0/1/0 ont 1 (0/1/0 is the frame number/slot number/port number 1 is the ONU id)
=========================================== 5, view the DBA template
MA5680T(config)# display dba-profile all
6, view the line template
MA5680T(config)#display ont-lineprofile gpon all

22 View the voice card board. narrow resource----display dsp state 0/0/1 (Failure: frame 0 slot 0 does not have dsp resource) The above statement indicates that the query failed, and the ASDA voice board is faulty.



MAN.MA5680T(config-if-epon-0/18)#pppoe simulate start 3 21 eth 1 untagged user-name n0451***** user-password ****** authentication-mode chap

MAN.MA5680T(config-if-epon-0/18)#
----------------------------------
ONT PPPoE test results
----------------------------------
Frame/slot/port: 0/18/3
ONT number: 21
ONT ETH port index: 1
ONT Vlan ID : -
Vlan priority: -
PPPoE test results: successful
Session ID : 12903
User IP : 42.100.1.255
User Gateway: 42.100.0.1

 

Related FAQ

Choosing the PoE switch to see these parameters is enough

Choosing the PoE switch to see these parameters is enough

OLT FTTH standard room configuration

OLT FTTH standard room configuration

Optical module of HUAWEI ET1BS12712S0 switch

Optical module of HUAWEI ET1BS12712S0 switch